Gate Hinges and Latches Explained: What a Pool Gate Legally Needs (and a Garden Gate Doesn’t)

Galvanised steel gate frame fitted with a self-closing adjustable tension gate hinge

A standard garden gate just needs a hinge strong enough to carry its weight, a galvanised T-hinge or a pair of double butt hinges will do the job for decades. A gate that gives access to a swimming pool is different entirely. Under AS1926.1-2012 and Victoria’s pool barrier rules, that gate has to close and latch itself from any open position, using hardware built to stop a child getting through it. That means a self-closing adjustable tension hinge and a dedicated pool safety latch mounted at the right height, not whatever is cheapest in the hardware aisle. Here is how to tell which gate you have, what each one legally needs, and which gate hinges and latches in Lifetime Pine’s range do the job.

In this article

Does my gate need self-closing gate hinges and latches?

If the gate sits somewhere in the fence or wall separating the pool from the rest of the property, it has to comply with AS1926.1-2012. Two parts of that standard land directly on hinges and latches: the gate must return to closed and engage its latch by itself from any position, including half open and stationary, and the latch cannot be adjustable from outside the barrier unless a tool is needed. A side or driveway gate with no pool access carries none of this. The gate also has to swing outward, away from the pool, not into it.

How high does a pool gate latch have to be?

The Victorian Building Authority’s pool and spa barrier checklist sets the release at one of three heights: at least 1500mm above finished ground level, at least 1400mm above the highest lower rail, rod or wire on the gate, or shielded so it cannot be reached from outside the barrier. The same checklist calls for any gap under the barrier to be 100mm or less. If someone on the pool side can reach over or through the gate to release the latch, it is not compliant, whatever the hardware.

Galvanised steel gate frame fitted with a self-closing adjustable tension gate hinge
A steel gate frame fitted with an adjustable tension hinge, the hinge that does the self-closing work on a pool gate.

What’s different about a self-closing pool gate hinge?

A self-closing hinge has a spring-tensioned mechanism built into the barrel, adjusted with an allen key until the gate reliably swings shut and latches from any position, not just from fully open. Lifetime Pine stocks two steel-to-steel versions, both rated to self-close gates up to 70kg per pair.

Safetech adjustable tension steel to steel pool gate hinge, pair
POOL-COMPLIANT HINGE
Safetech Adjustable Tension Steel to Steel Hinge

Pair of steel-to-steel hinges, self-closes gates up to 70kg, adjustable closing tension, exceeds AS1926.1-2012. Pack includes screws, safety cap and allen key.

$44.00 Pair View product →
HD adjustable tension pool gate hinge, heavy duty steel to steel
HEAVY DUTY POOL HINGE
HD Adjustable Tension Hinge

Premium heavy duty steel-to-steel hinge, self-closes gates up to 70kg, adjustable closing tension, meets all pool standards. The step up for a heavier steel-framed gate.

$88.40 Each View product →

Wind the tension adjuster with the allen key, not by hand, and recheck it every few months. Hinges loosen off over a year of use, and a pool gate that used to swing shut but no longer does is a hazard, not a maintenance note.

Which hinge suits a standard garden or side gate?

Away from a pool, the gate just needs to carry its own weight and swing cleanly, so the choice comes down to the gate’s material and weight.

Scotch T hinge 200mm, galvanised, pair, for timber or metal gates
STANDARD GARDEN GATE HINGE
Scotch T Hinge 200mm

Galvanised heavy duty narrow T-hinge, pack of 2 hinges and fixing screws, ideal for timber or metal gates. Surface-mounted, no mortise needed. Also stocked in 150mm, 250mm and 300mm.

$21.00 Pair View product →

For a framed timber or steel gate needing a smoother swing, a galvanised double butt hinge or the zinc version uses a ball bearing with its own lubrication inlet. A heavy steel frame, built from galvanised RHS, is usually better served by a weld-on hinge (sold in matching left and right hand pairs) welded onto the post and frame rather than screwed on. For a lighter, barn-style gate, a hinge strap spreads the load across a longer plate.

Gate hinges and latches compared

Hardware Best for Self-closing Pool compliant Price
Scotch T-Hinge (150 to 300mm) Timber or light steel garden or side gate No No $18.00 to $34.20 pair
Hinge Double Butt (Gal or Zinc) Framed timber or steel gate, ball-bearing swing No No $19.50 to $25.90 each
Hinge Weld On (left or right) Heavy steel gate frame, welded fit No No $16.00 pair
Safetech Adjustable Tension Hinge Pool gate, steel-to-steel, up to 70kg Yes Yes, exceeds AS1926.1-2012 $44.00 pair
HD Adjustable Tension Hinge Heavier pool gate, up to 70kg Yes Yes, meets pool standards $88.40 each

What latch do I need on a pool gate?

The hinge only handles the closing. The latch is what keeps the gate shut, and on a pool gate it has to be a dedicated pool safety latch, not a standard gate latch with a lock added.

Pool safety gate latch, magnetic, child proof, meets Australian pool safety standards
POOL-COMPLIANT LATCH
Pool Safety Gate Latch

Magnetic pool gate lock and latch, child proof design, E-coated fiber-reinforced polymer, keys included, fits metal and wood gates, meets Australian pool safety standards.

$98.00 Each View product →

Mount it at the height set out above, 1500mm or more from the ground, or 1400mm above the top rail if that comes out higher. For a gate outside the pool barrier, a thumb latch, a spring loaded latch, or the budget improved pattern latch will hold a gate shut fine, and the Viper key lockable latch adds a cylinder lock where needed. None substitute for the dedicated pool latch on a pool barrier gate.

What about gate stops and pulls?

Two small parts worth adding either way. A gate stop ($22.00 each) stops a self-closing gate swinging past vertical into the fence, worth fitting any time a tensioned hinge is doing the closing. A classic gate pull ($7.00 each) gives you something to grab to close the gate from the far side.

Fitting pool-compliant gate hinges and latches: the short version

What you’ll need: adjustable tension hinges rated to the gate’s weight, a pool safety latch, an allen key, and a gate stop if the swing is forceful.

Step 1: Fit the hinges. Mount steel-to-steel, matched to the post and gate frame, checking the pair’s combined rating covers the gate’s weight.

Step 2: Hang the gate and check the swing. It has to open away from the pool, not into it.

Step 3: Set the tension. Wind the adjuster with the allen key until the gate closes and latches from any position, not just from fully open.

Step 4: Fit the latch at the correct height, then test it. At least 1500mm above the ground, or 1400mm above the top rail if higher, and check it closes and latches from a few different positions, including barely ajar.

Common mistake to avoid: fitting a standard garden gate hinge on a pool gate because it is cheaper. It will not self-close, and it will not pass a council pool safety inspection in Victoria.

Frequently asked questions

Does every gate near my pool need self-closing gate hinges and latches?

Only gates that form part of the pool’s safety barrier, meaning the fence or wall separating the pool from the rest of the property or a neighbouring property. A side gate with no pool access through it does not need to comply.

How do I know if my current gate latch is mounted high enough?

Per the Victorian Building Authority’s pool and spa barrier checklist, the release has to sit at least 1500mm above the ground, or at least 1400mm above the highest lower rail, or be shielded so it cannot be reached from outside. If someone on the pool side can reach over or through the gate to release it, it is not compliant.

What weight gate will a Safetech or HD adjustable tension hinge handle?

Both are rated to self-close gates up to 70kg per pair, which covers the large majority of residential pool gates, steel-framed gates included.

Does a pool gate have to swing in a particular direction?

Yes. A gate that gives access to the pool area has to swing outward, away from the pool, not into it.

Is a magnetic latch actually strong enough for a pool gate?

Lifetime Pine’s pool safety gate latch is a magnetic, child-resistant design built specifically to meet Australian pool safety standards, a different and tested category from a standard magnetic catch sold for cupboards or screen doors.

Fitting pool-compliant gate hardware?

Call Lifetime Pine on (03) 9555 5569 or visit us at 48 Cochranes Rd, Moorabbin, and we’ll match the hinge and latch combination to your gate.

Get in touch →

48 Cochranes Rd, Moorabbin VIC 3189

Building a driveway gate on a track instead of a hinged swing gate? See our guide to sliding gate hardware.

Sources: Victorian Building Authority pool and spa barrier checklist (via Monash City Council); hinge selection guidance from Hardware Source.